Pro Scale X-Series™ Sand Car 109076-4
THIS IS A PRE-ORDER, FIRST DELIVERY UNIT WILL BE IN STORE TO VIEW THE WEEK OF APRIL 4TH 2025.
PRE-ORDER UNITS WILL BE READY FOR PICKUP APRIL 11TH. ONLINE ORDERS WILL SHIP TO ARRIVE NEAR APRIL 11TH.
KING OF THE DUNES
Driving a sand car is an adrenaline-fueled thrill ride like nothing else on Earth. Outfitted with 1000+ horsepower engines and long-travel suspension systems, sand cars can top 150 mph and wheelie with just a blip of the throttle. The new Traxxas Pro Scale Sand Car is a 55+mph replica purpose-built to deliver the same raw excitement and thrill of driving the full-size Funco car in dramatic X-Series™ scale.
FEATURES
- Replica Funco Sand Car Clipless Body
- Full-length tube frame support
- Detailed interior with driver figures
- Replica engine with licensed accessories
- 10″ color-matched whip lights
- Spring loaded-Flex Tech mounts for rollover protection
- High-performance rear wing
- Wheelie bar
- VXL-8s Waterproof Electronic Speed Control
- Aggressive tuning for more power at any rpm
- Integrated cooling fan
- Real-time telemetry via Traxxas Link
- Machined heat sink
- 10-gauge silicone wire
- Integrated protection circuits
- LED status lights
- Velineon 1200XL Brushless Motor
- “Big Block” brushless motor
- 4-pole 1275 Kv
- 5 mm output shaft
- Oversize aluminum heatsink for improved cooling
- Dual cooling fans
- 55+ mph with Two 4s LiPo Batteries and Included Speed Gearing
- Traxxas Stability Management
- Improves straight line acceleration and braking on low-traction surfaces
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- TQi 2.4 GHz 2-Channel High Output Radio System
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
- Programmable multi-function knob
- 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Patented waterproof receiver box with easy-access plug
- Ultra-Heavy-Duty 8s Drivetrain
- Steel CV driveshafts & axles
- New larger X-Series differential output yokes
- Fully machined aluminum stub axles
- Direct-Drive Transmission
- 1.5 mod wide-face steel gears
- 1.0 mod steel pinion and spur gears
- Fixed gear mesh system
- Rear Differential
- Huge 1.5 module straight-cut ring gear
- Sealed 4-gear design
- Splined outdrives attached with external thru-bolt method
- Reinforced bulkhead and covers for increased bearing support
- Rock-Solid Motor Mounting System
- Precise preset gear mesh adjustments
- 4 keyed pins lock the motor in place
- Motor retention separate from gear mesh
- GT Maxx Shocks
- Machined aluminum threaded body
- Extra-large bore and capacity
- Height-adjustable spring retainer
- Heavy-duty composite shock caps with pivot balls
- Lower spring perches bolted on
- Suspension
- Polished alumunum-finish suspension arms
- Made from cold-weather HD composite
- Performance-optimized geometry
- Double-shear connections
- High-strength steel suspension pins with retainers
- 4 mm machined pivot balls
- Fixed high-strength camber and toe links
- Heavy-duty steering blocks and axle carriers
- Oversized wheel bearings
- Braking
- Electronic rear brakes
- Powerful front disc brakes with spring-loaded calipers
- Operated by 2075 digital servo
- Sheathed brake cables
- Stainless steel slotted and drilled brake rotors
- Low-CG Chassis Design
- Modular chassis with interlocking bulkheads
- Low center of gravity for improved handling
- Flat bottom design
- Interlocking skid plates
- High-strength buttressing on shock towers
- Dual snap-lock battery compartments
- Protects batteries from side impacts
- Allows secondary battery-clip security
- Interlocking components for tight tolerances
- Wire management for clean appearance
- Wheels and Tires
- 7.5" Rear paddle tires
- Aggressive paddle design
- Belted carcass resists ballooning
- 6.8" front arrow-pattern tires
- Excellent traction on sand, dirt, and pavement
- Replica Funco beadlock wheel design
- Color-matched beadlock rings and axle nuts
- High-strength glue and bead design
- Huge 24 mm splined wheel hubs
- Steering
- Powerful 450 oz-in steering servo (2085XL)
- Heavy-duty cam-style servo saver
- Dirt evacuation channels
- Fully waterproof
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
MODEL SPECS
| Name: |
Pro Scale Sand Car |
| Speed: |
55+ mph with dual 4s LiPo batteries and speed gearing |
| Scale: |
X-Series |
| Length: |
32 inches (812 mm) |
| Width: |
21.7 inches (551 mm) |
| Ground Clearance: |
1.98 inches (50 mm) |
| Weight: |
22.06 pounds (10 kg) |
| Height: |
11.1 inches (283 mm) (body), 19.6 inches (498 mm) (whip lights) |
| Wheelbase: |
21.4 inches (543 mm) |
| Shock Length: |
5.08 inches (129 mm) (front), 7.13 inches (181 mm) (rear) |
| Tires (Arrow Pattern, Front): |
6.8″ x 2.3″ (173 mm x 58 mm) |
| Tires (Paddle, Rear): |
7.5″ x 4.0″ (191 mm x 102 mm) |
| Wheels (Front): |
3.2″ (82 mm, inner) x 4.9″ (125 mm, outer) |
| Wheels (Rear): |
3.6″ (91 mm, inner) x 4.7″ (120 mm, outer) |
| Speed Control: |
Velineon VXL-8s |
| Motor: |
Velineon 1200XL Brushless |
| Overall Drive Ratio: |
16.4:1 (21/50 motor pinion and spur gear) |
| Differential Type: |
Sealed, four-gear, limited-slip |
| Gear Pitch: |
Module 1.5 (transmission), Module 1.0 (pinion & spur) |
| Chassis Structure/Material: |
Reinforced Nylon Tub |
| Brake Type: |
Electronic (rear), Dual vented discs (front) |
| Drive System: |
Direct-drive, RWD |
| Steering: |
Bellcrank |
| Radio System: |
TQi 2.4 GHz Transmitter with TSM receiver |
| Steering Servo: |
2085XL metal gear (450 oz-in.) |
| Skill Level: |
5 |
| Battery Tray: |
186 mm x 51 mm x 44 mm |
| Required Batteries: |
4 “AA” (transmitter) and 4-cell LiPo battery (x2) |
MOTOR SPECS
| otor Name: |
Velineon® 1200XL |
| Motor Type: |
1275 kV sensorless brushless |
| Motor Weight: |
23.44 ounces (665 g) |
| Motor Length: |
4.32 inches (110 mm) |
| Motor Diameter: |
1.88 inches (48 mm) |
| Motor Shaft Size: |
5 mm |
| Motor Connector Type: |
6.5 mm bullet connectors |
ESC SPECS
| ESC Name: |
Velineon® VXL-8s |
| ESC Type: |
Brushless |
| ESC Case Size: |
2.23 inches (58 mm) / 2.83 inches (72 mm) / 1.81 inches (46 mm) |
| ESC Weight: |
7.60 ounces (215.5 g) |
| Motor Connectors: |
6.5 mm bullet connectors |
| Battery Connectors: |
Traxxas High-Current Connectors |
| ESC Power Wire: |
10 gauge Maxx® Cable |
What’s In The Box:
- Pro Scale Sand Car Ready-To-Race model with Traxxas Big Block™ brushless motor
- VXL-8s waterproof electronic speed control with integrated telemetry
- Quick Start Guide
- TQi™ 2.4 GHz radio system
- High visibility whip lights
- Wheelie bar
- Speed gearing
- High quality maintenance tools
What You’ll Need:
- LiPo Batteries
Traxxas recommends dual 4-Cell, 6700 mAh Power Cell LiPo batteries (part 2890X) or the Dual 4s Completer Pack (Part 2997).
- LiPo Balance Charger with iD®
Traxxas EZ-Peak® Live Dual 4s-capable charger is recommended for easy and fast charging performance (model 2973).
- AA Alkaline Batteries
Four AA alkaline batteries for the transmitter.
EXPLODED VIEWS
MODEL 109076-4: Pro Scale® X-Series Sand Car: fully assembled, Ready-To-Race®, with TQi™ 2.4 GHz radio system, VXL-8s brushless power system, and Replica Funco clipless body.
This item will be available in store on the release date. Orders placed for shipping will ship to arrive on the release date.
