Disruptor®: High Performance Race Boat with TQ™ 2.4 GHz radio system 106064-4

Releases September 20th. 

Pre-Order for delivery on September 20th.

Disruptor®: High Performance Race Boat with TQ™ 2.4 GHz radio system 106064-4

FULL-THROTTLE, NON-STOP FUN

The all-new 4s Disruptor® is the one boat that holds nothing back.
Pin the throttle and Disruptor’s deep-V hull launches hard on its
way to 40+MPH on a single 4s LiPo battery. At 26″ long, Disruptor is
perfectly sized to be quick and agile on small ponds and stable in open
water. Disruptor is purpose-built by Traxxas for the wildest stunts and
unlimited fun—all with self-righting security.

• FAST 40+MPH Speed
• RELIABLE 4s Power
• 26-INCH Deep-V Stability
• RAPID RIGHT™ Self-Righting Security
• RUGGED Construction

SELF-RIGHTING SECURITY

Disruptor’s confidence inspiring speed and handling encourages
jumps, twists and barrel rolls that might land it upside down.
Just a quick blip of reverse throttle and Rapid Right
self-righting instantly puts Disruptor right back in the action

EXTREME POWER AND EFFICIENCY

4s power launches Disruptor hard and fast while the
performance engineered hull jumps on plane quickly. With just
a single 4s 6700 Traxxas battery, the VXL-4s power system
efficiently runs Disruptor to 40+mph speeds.
For novice boaters or casual cruisers, Patented Traxxas
Training Mode reduces power by 50%. Disruptor is also
compatible with 2s and 3s LiPo batteries for more
relaxed running.

Brushless Outrunner Motor
• Extremely efficient 14-pole design
• High RPM operation
• 5 mm output shaft
• Water-cooled machined aluminum motor mount

VXL-4s Marine Speed Control
 • Fully waterproof
 • Accepts 2s, 3s, or 4s  LiPo batteries
 • Large aluminum heat  sink with water cooling  channel
 • Patented Training Mode™  reduces power by 50%

HIGH-PERFORMANCE DEEP-V HULL

Disruptor’s 26″ injection-molded ABS hull delivers incredible strength in a wave-cutting deep-V design.
Precisely molded strake detail in the bottom hull increases Disruptor’s sharp handling and stability. The hull’s enhanced rigidity also provides superior hatch sealing and water rejection.

• Agile handling, no-lift turns, and superior high-speed stability
• Interior layout and battery placement drastically improves handling
• Injection-molded design increases rigidity
• Weight is concentrated inboard along the centerline

Aluminum and Stainless Hardware

• Precision die-cut stainless steel turn fins and trim tabs
• Rust-free stainless steel and nickel-plated hardware
• 6061-T6 aluminum drive strut and rudder

Quick-Release Flex Cable and High-Performance Prop

• Shorter distance between motor and prop for greater efficiency
• Easy to disconnect with the included wrenches
• Consistent prop surface finish resists nicks and bending
• Prop is inexpensive to replace with no performance loss to metal props

DUAL-INLET WATER COOLING

Dual pick-ups in the hull supply cooling water to the motor and ESC independently. A large finned heat sink with internal water channel cools the VXL-4s for extended run times. An innovative water-cooled motor mount draws heat out of the brushless outrunner motor.

• Dual water pick-ups in the hull
• Streamlined dual-outlet transom plate
• Efficient cooling for all-day fun on the water

FACTORY-APPLIED GRAPHICS

Disruptor’s bold graphics make a statement on the lake, with a
custom look even pro painters can’t match. No painting is required;
all the graphics are pre-applied to get Disruptor out of the box and
into the water with speed and style.

SEALED CLIPLESS HATCH

Disruptor’s injection-molded hatch secures tightly to the foam seal
with double-walled construction to keep water out. Four low-profile
hatch nuts hold the hatch perfectly in place without the need for
time-consuming thumbscrews. Use the included hatch nut tool or
switch to the optional tool-free wingnuts.